Android and the no service bug fortunately — or maybe not — the no service bug is a fairly common issue with android devices across every brand and carrier. If you are still experiencing a problem:
I see the tv menu but when i tried the hdmi inputs none work.
Why does my android box say no signal. How to solve the problem of no signal bar ? Unable to display a picture from a computer that is connected to the hdmi input of the tv. This means new satellite settings have been uploaded, but the device has not fully integrated with the adjustments.
I used a 2nd cable box that it works in my 2nd tv but still not signal. If the tv still only shows a black screen, try the step below. Also, i tried the white/red cables (comp) to connect the dvd but no signal.
The tv is not displaying a picture or has no signal. Wait for the signal to initialize. We did, made no difference in our signal.
The set top box connected via hdmi to the tv. Return to the tv broadcast screen or switch inputs on my android tv. While certain areas have connectivity problems, which we can hardly do anything about, some phones begin showing no signal even though the network is available.
If not, go back to the app settings. If you have a case on your phone, please remove it (some cases can physically block the signal between your phone and the kardia device). My problem is that i get the “no cable connected” message but i do hear the tv show via the receiver’s speakers which means that the tv does get the signal from the set top box.
Plug the chromecast device into an hdmi port on the tv. I have a vizio tv and suddenly is showing no signal for my cable box and dvd. Android should learn to switch better between wlan networks.
Your smart tv box is able to connect to wifi but says no internet. For anyone whose android handset has taken a sit on its service, don't worry — the answer isn't far. If you have another tv with an hdmi display, try to set up the chromecast on that tv.
Ipads normally have the microphone near the top of the device. So last week i went to ebay and purchased an cell phone signal booster. The cross or x symbol in network bars indicates 'no internet connectivity'.
I followed all the steps but nothing worked. You may have exceeded your data limit or the internet connection is too weak. So login to the router allocate a dedicated ip address for your tv, map the ip address to the mac address of the tv.
No signal or no connectivity is a big problem for cell phones. When flight mode is on it is like a mini switch off it will disable the sim cards from power and then after few seconds on turning off the flight mode.the device will recognise the sim networks and hence will show the network. Change the tv to the same hdmi input as the chromecast.
If this is the issue here is what you can try. How to fix “no service and signal” on android and samsung devices written by elizabeth kartini “no service” is one of the widespread issues faced by many android smartphone users, and in this article, we are going to share some of the most effective solutions. Test your radio signal broadcast.
To do this, go to “ settings > about phone > network > signal strength or network type and strength.”. Wait for the signal to initialize. If your android phone is on the list of blocked devices, click remove or allow to restore internet access.
There is no picture on the tv and the entire screen is blue. Clear cache and see if the app is working fine. Microphones in smartphones are usually at the bottom of your device.
I installed the booster today. Using the lte discovery app. Ensure the kardia device is within 6 inches of your smart phone’s microphone.
This option isn’t present on all android devices. It only shows up when data is t. I have a 2 year old samsung smart tv, connected to a receiver (thus i can have the tv sound on better speakers etc).
Test the chromecast on another tv, if available. For other routers, look for options such as the mac address filtering menu. If you are using signal on android, go to settings > apps and notifications > select signal > storage and cache.
Flight mode is the best choice when you wish to have a mini switch off. Generaly this symbol doesnt shows up when data is turned off. I found my signal went from 102dbm to 65 to 70 dbm full bars.
I believe your tv box is picking a wrong ip address range. Whether you use an sd or hd box, the provider may release a new firmware and update it in the background. I can check if my device is blocked or not by navigating to the “advanced” tab and selecting the “traffic control” option.
However, when we try to make a call the signal drops out to no service.